User Manual

Command Reference Server Commands
12-123
Restrictions Requires privileged user status.
Parameters passwd
Enter a password of 16 or fewer characters.
Note: SCS passwords are case-independent, even when enclosed in quotes.
Defaults “access”
Examples
Local>> SET SERVER LOGIN PASSWORD
Password> platyp (not echoed)
Verification> platyp (not echoed)
Local>>
See Also Set/Define Server Incoming Password, page 12-121; Login Password, page 8-
10
12.9.15 Set/Define Server Name
Specifies the name of the SCS. The name string must be in quotes if lowercase characters are used.
Restrictions Requires privileged user status.
Parameters ServerName
Assign a name to the SCS, 16 alpahanumeric characters or less.
Defaults SCS_xxxxxx where xxxxxx represents the last 3 segments of the unit’s
hardware address.
Examples
Local>> SET SERVER NAME “docserver”
See Also Changing the Server Name, page 2-8
12.9.16 Set/Define Server Nameserver
Specifies the IP address of the name server (if any) for TCP/IP connections. This host will attempt to resolve
text hostnames into numeric form if the local host table is unable to do so.
Restrictions Requires privileged user status.
SET
DEFINE



SERVER NAME ServerName
SET
DEFINE



SERVER
SECONDARY
NAMESERVER IPaddress