User Manual

Command Reference Server Commands
12-120
12.9.9 Set/Define Server Host Limit
Sets the maximum number of TCP/IP hosts learned from Rwho that the server will keep information for.
Hosts from the preset host table are exempt from this limit. If the new limit is less than the current limit and
the host table is full, the limit will be slowly weeded down to the new value.
Restrictions Requires privileged user status.
Parameters limit
A value between 0 and 200.
None
No limit is set.
Defaults 200 hosts
Examples
Local>> SET SERVER HOST LIMIT 6
12.9.10 Set/Define Server Inactivity
Sets the period of time after which a port with Inactivity Logout enabled is considered inactive and is
automatically logged out.
Restrictions Requires privileged user status.
Parameters limit
Enter an inactivity period of 1 to 120 minutes.
Defaults 30 minutes
Examples
Local>> DEFINE SERVER INACTIVITY LIMIT 20
See Also Set/Define Ports Inactivity Logout, page 12-66
SET
DEFINE



SERVER HOST
LIMIT
limit
NONE



SET
DEFINE



SERVER INACTIVITY
TIMER limit