User Manual

Command Reference Service Commands
12-110
Parameters EndString
Any ASCII characters, or non-ASCII characters entered as hexadecimal digits
(e.g. \45). The combined length of the SOJ and EOJ strings must not exceed 62
characters.
None
Clears any previously-configured string.
Defaults No string configured
See Also Clear/Purge Service, page 12-107
12.8.7 Set/Define Service Formfeed
If enabled (the default), the SCS will append a formfeed at the end of any LPR print jobs.
Restrictions Requires privileged user status.
Defaults Enabled
See Also Clear/Purge Service, page 12-107
12.8.8 Set/Define Service Identification
Provides an information string for the specified service.
Restrictions Requires privileged user status.
Parameters string
Enter an information string of up to 40 characters.
SET
DEFINE



SERVICE ServiceName FORMFEED
ENABLED
DISABLED



SET
DEFINE



SERVICE ServiceName IDENTIFICATION
string
NONE


