User Manual

Command Reference Service Commands
12-109
12.8.4 Set/Define Service Banner
Specifies whether the SCS should print a banner page before starting the job. Banners should be disabled
(the default) for all PostScript and plotter (binary) data.
Restrictions Requires privileged user status.
Defaults Enabled
See Also Clear/Purge Service, page 12-107
12.8.5 Set/Define Service Binary
If the binary characteristic is enabled on a service, character translation (i.e. <cr> to <cr><lf> translation)
and tab expansion will be permitted on the print data. The binary characteristic should be disabled when
printing PCL data.
Restrictions Requires privileged user status.
Defaults Disabled
See Also Clear/Purge Service, page 12-107
12.8.6 Set/Define Service EOJ
Specifies a string to be sent to the attached device at the end of every job regardless of network protocol.
Restrictions Requires privileged user status.
SET
DEFINE



SERVICE ServiceName BANNER
ENABLED
DISABLED



SET
DEFINE



SERVICE ServiceName BINARY
ENABLED
DISABLED



SET
DEFINE



SERVICE ServiceName EOJ
EndString
NONE


