User Manual

Command Reference Modem Commands
12-105
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
string
A string of up to 12 characters.
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM STATISTICS “statreport”
See Also Define Ports Modem Commandprefix, page 12-95; Set/Define Logging, page
12-174
12.7.23 Define Ports Modem Type
Specifies a predefined modem profile. Use the Show Modem command to see a list of available profiles.
This command automatically enables modem control for the specified port, if not enabled already.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
TypeNum
A predefined modem profile number.
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM TYPE 12
See Also Show/Monitor/List Modem, page 12-106; Modem Profiles, page 9-2
DEFINE PORTS
PortList
ALL
MODEM TYPE TypeNum