User Manual

Command Reference Modem Commands

12-104

12.7.21 Define Ports Modem Speaker

Enables or disables the modem’s speaker. The speaker allows the user to hear the modem’s dialup and

connect sequences for debugging purposes.

Restrictions Requires privileged user status.

Parameters PortList/All

Specifies a particular port or group of ports, or all ports. Port numbers should

be separated with commas (for lists) or dashes (for ranges).

Note: In the absence of a PortList or the All parameter, the configuration will affect the

current port only.

EnableString

A string of up to 12 characters. Commonly set to “m1/1.” When this string is

received by the modem, the modem’s speaker will be enabled.

DisableString

A string of up to 12 characters. Commonly set to “m0.” When this string is

received by the modem, the modem’s speaker will be disabled.

Defaults Disabled (no strings defined)

Examples

Local>> DEFINE PORT 2 MODEM SPEAKER ENABLED

Local>> DEFINE PORT 2 MODEM SPEAKER “m11” “m0”