User Manual

Command Reference Modem Commands
12-103
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
string
A string of up to 12 characters. Commonly set to “RING.”
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM RING “M&M”
See Also Profile Settings, page 9-5
12.7.20 Define Ports Modem Save
Defines a string that forces the modem to save its configuration to NVR.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
string
A string of up to 12 characters. Commonly set to “&w.”
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM SAVE “&w”
See Also Profile Settings, page 9-5
DEFINE PORTS
PortList
ALL
MODEM SAVE string