User Manual

Command Reference Modem Commands

12-102

Note: In the absence of a PortList or the All parameter, the configuration will affect the

current port only.

string

A string of up to 12 characters. Commonly set to “OK.”

Defaults Depends on modem and modem profile.

Examples

Local>> DEFINE PORT 2 MODEM OK “OK”

See Also Define Ports Modem Attention, page 12-93; Profile Settings, page 9-5

12.7.18 Define Ports Modem Reset

Defines a string that will cause the modem to reset and reload its configuration from NVR.

Restrictions Requires privileged user status.

Parameters PortList/All

Specifies a particular port or group of ports, or all ports. Port numbers should

be separated with commas (for lists) or dashes (for ranges).

Note: In the absence of a PortList or the All parameter, the configuration will affect the

current port only.

string

A string of up to 12 characters. Commonly set to “Z.”

Defaults Depends on modem and modem profile.

Examples

Local>> DEFINE PORT 2 MODEM RESET 2