User Manual

Command Reference Modem Commands
12-101
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM NOCARRIER “NO CARRIER”
See Also Profile Settings, page 9-5
12.7.16 Define Ports Modem Nodialtone
Defines a string to expect on outbound calls when the modem can’t detect a dial tone.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
string
A string of up to 12 characters. Commonly set to “NO DIAL.”
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM NODIAL “NO DIAL”
See Also Profile Settings, page 9-5
12.7.17 Define Ports Modem OK
Defines a string to expect after the Attention string is sent to the modem.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
DEFINE PORTS
PortList
ALL
MODEM NODIALTONE string
DEFINE PORTS
PortList
ALL
MODEM OK string