User Manual

Command Reference Modem Commands
12-100
See Also Define Ports Modem Commandprefix, page 12-95; Profile Settings, page 9-5
12.7.14 Define Ports Modem Init
Defines an initialization string to send to the modem. The string is preceded by the Commandprefix string.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
string
A string of up to 64 characters.
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM INIT “&fw1&c1&d3s2=128”
See Also Define Ports Modem Commandprefix, page 12-95; Profile Settings, page 9-5
12.7.15 Define Ports Modem Nocarrier
Defines a string to expect on outbound calls when the modem can dial but doesn’t connect.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
string
A string of up to 12 characters. Commonly set to “NO CARRIER”
DEFINE PORTS
PortList
ALL
MODEM INIT string
DEFINE PORTS
PortList
ALL
MODEM NOCARRIER string