User Manual

Command Reference Modem Commands
12-98
DialString
A string of up to 12 characters. Often touch tone dialing is activated with “dt”
and pulse dialing is activated with “dp.”
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM DIAL “dt”
See Also Define Ports Modem Commandprefix, page 12-95; Profile Settings, page 9-5
12.7.11 Define Ports Modem Error
Defines a string to expect on outbound calls when the modem encounters an error.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
string
A string of up to 12 characters set to “ERROR” by default.
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM ERROR “ERROR”
See Also Profile Settings, page 9-5; Define Ports Modem Errorcorrection, page 12-98
12.7.12 Define Ports Modem Errorcorrection
Enables or disables error correction in the modem
Restrictions Requires privileged user status.
DEFINE PORTS
PortList
ALL
MODEM ERROR string
DEFINE PORTS
PortList
ALL
MODEM ERRORCORRECTION
ENABLED
DISABLED
DisableString EnableString




