User Manual

Command Reference Modem Commands

12-96

Note: In the absence of a PortList or the All parameter, the configuration will affect the

current port only.

DisableString

A string of up to 12 characters. When this string is received by the modem, data

compression will be disabled

Note: The DisableString and the EnableString must be entered together.

EnableString

A string up to 12 characters. When this string is received by the modem, data

compression will be enabled.

Defaults Disabled (no strings defined)

Examples

Local>> DEFINE PORT 2 MODEM COMPRESSION ENABLED

Local>> DEFINE PORT 2 MODEM COMPRESSION “%c” “%c1”

See Also Profile Settings, page 9-5; Compression, page 9-9

12.7.8 Define Ports Modem Connected

Defines a string to expect on outbound calls when the modem is connected to the remote location.

Restrictions Requires privileged user status.

Parameters PortList/All

Specifies a particular port or group of ports, or all ports. Port numbers should

be separated with commas (for lists) or dashes (for ranges).

Note: In the absence of a PortList or the All parameter, the configuration will affect the

current port only.

ConnectString

A string of up to 12 characters. Commonly set to “CONNECT.”

Defaults Depends on modem and modem profile.

Examples

Local>> DEFINE PORT 2 MODEM CONNECT “CONNECT”