User Manual

Command Reference Modem Commands
12-93
12.7.2 Define Ports Modem Attention
Defines a string to get the modem’s attention.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Defaults Depends on modem and modem profile.
Examples
Local>> DEFINE PORT 2 MODEM ATTENTION “at”
See Also Profile Settings, page 9-5
12.7.3 Define Ports Modem Busy
Defines a string that the SCS will expect from the modem on outbound calls to signal that the remote
number is busy or otherwise unavailable.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
string
A string of up to 12 characters. Commonly set to “BUSY.”
Defaults Depends on modem and modem profile.
See Also Profile Settings, page 9-5
DEFINE PORTS
PortList
ALL
MODEM ATTENTION string
DEFINE PORTS
PortList
ALL
MODEM BUSY string