User Manual

Command Reference Port Commands
12-88
Parameters SiteName
A site name of up to 12 characters. If no site name is given, a site with the
default site characteristics will be used.
IPaddress
Defines the non-negotiable remote IP address.
address
An IP address in standard numeric format (for example, 192.75.2.0).
Examples
Local> SET SLIP irvine
Local> SET SLIP allison IPADDRESS 192.0.1.221
See Also Set/Define Ports SLIPdetect, page 12-79; Starting PPP/Slip for Incoming
Connections, page 4-10
12.6.56 Show/Monitor/List Ports
These commands display information about the server’s ports. The current port is the default, unless another
port number or All is specified. You can also get information about all the local ports having a particular
Access value. If no keywords are added to the command, the current port’s Characteristics will be shown.
If the port is a virtual port, irrelevant information (such as baud rate, parity, or flow control) will not be
displayed. Any List command performed for a virtual port will display the template port’s configuration.
Restrictions You must be the privileged user to use the Monitor command.
Secure ports cannot Show or List ports other than their own.
Errors Status and Counters parameters are not valid with List.
Counters is not valid for virtual ports.
Parameters All
Displays information for all ports.
PortNum
Specifies a particular port.
Access
Display ports that match a specified access-type. Must be used in conjunction
with the Local, Dynamic, Remote, or None parameter.
SHOW
MONITOR
LIST





PORTS
ALL
PortNum
ACCESS
LOCAL
DYNAMIC
REMOTE
NONE







CHARACTERISTICS
COUNTERS
STATUS
SUMMARY
PPP
MODEM STATUS[]