User Manual

Command Reference Port Commands
12-86
12.6.53 Set Session
Specifies the characteristics for the current session.
Parameters Delete
Specifies which character to send as the delete character. Set Session Delete
sends a delete character (ASCII 0x7f). This command has no effect if Pasthru
or Passall are in effect. This command and the Newline command may be
helpful if you are getting odd output from a Telnet session.
Backspace
Set Session Delete Backspace sends a backspace character (ASCII 0x8, or
Ctrl-H).
Echo
Enabling asks the unit to echo for TCP connections. The default is Disabled,
on the assumption that the remote host will provide echoing.
Newline
Changes what is sent to the remote service when you press the newline (usually
<Return>) key. This command has no effect if Pasthru or Passall (see below)
are in effect.
CR
Send carriage returns (ASCII 0xA) only.
LF
Send linefeeds (ASCII 0xD) only.
CRLF
Send both carriage return and linefeed.
Interactive
Allows server-specific keys (i.e. Forward, Backward, and Local) and messages
to be interpreted by the unit.
SET SESSION
DELETE
DELETE
BACKSPACE



ECHO
ENABLED
DISABLED



NEWLINE
CR
LF
CRLF







INTERACTIVE
PASSALL
PASTHRU






















