User Manual

Command Reference Port Commands
12-82
12.6.48 Set/Define Ports Type
Describes the type of device connected to the port.
Restrictions Requires privileged user status to use this command on ports other than your
own.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
ANSI
VT100 compatible devices.
Softcopy
VT100 without clear screen or cursor controls.
Hardcopy
Deleted characters are echoed between backslashes; there is no cursor
movement.
Defaults Softcopy
See Also Setting the Device Type, page 8-13
12.6.49 Set/Define Ports Username
Used to specify a username for the port. When the username is defined, you will not be asked for one when
logging in to the port.
Restrictions Requires privileged user status to use this command on ports other than your
own. Secure users may not use this command.
SET
DEFINE



PORTS
PortList
ALL
TYPE
ANSI
SOFTCOPY
HARDCOPY





SET
DEFINE



PORTS
PortList
ALL
USERNAME
username
NONE


