User Manual

Command Reference Port Commands
12-77
number
The maximum size, in KB, of the log file. Enter an integer between 0 and 250.
A value of 0 turns logging off.
Defaults No logging
See Also Set/Define Ports Access, page 12-50; Define Email, page 12-49; Define Ports
Event Email Serialdata, page 12-64
12.6.40 Set/Define Ports Session Limit
Limits the number of active sessions on a port. The maximum number of session configured for a port
cannot exceed the server session limit.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
limit
An integer between 0 and 8.
None
Allows the maximum number of sessions.
Defaults Limit: 4 sessions
See Also Set/Define Server Session Limit, page 12-127; Port-Specific Session
Configuration, page 8-4
SET
DEFINE



PORTS
PortList
ALL
SESSION LIMIT
limit
NONE


