User Manual

Command Reference Port Commands
12-75
12.6.36 Define Ports PPPdetect
Automatically detects incoming PPP characters and starts running PPP.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Defaults Enabled
See Also Define Ports PPP, page 12-72; Purge Port PPP, page 12-47; Set/Define
Logging PPP, page 12-174; Set PPP, page 12-87; Show/Monitor/List Ports
PPP, page 12-88; Chapter 7, PPP
12.6.37 Set/Define Ports Printer
If enabled, the server will verify that the port is online before sending data to it.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Defaults Disabled
DEFINE PORTS
PortList
ALL
PPPDETECT
ENABLED
DISABLED



SET
DEFINE



PORTS
PortList
ALL
PRINTER
ENABLED
DISABLED


