User Manual

Command Reference Port Commands
12-72
Examples Local>> SET PORT 2 PREFERRED TELNET 192.0.1.3
Local>> SET PORT 3 PREFERRED todd
See Also Connect, page 12-18; Rlogin, page 12-21; Set/Define Ports Autoconnect, page
12-53; Define Ports Dedicated, page 12-61; Setting Session Characteristics,
page 8-6
12.6.35 Define Ports PPP
Enables PPP to run on the specified port and configures PPP-related settings. This command does not start
PPP.
Restrictions Requires privileged user status.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Enabled/Disabled
Enables or disables PPP on a specified port, but does not start PPP.
DEFINE PORTS
PortList
ALL
PPP
ENABLED
DISABLED
DEDICATED
ACCM
map
XONXOFF



CHAP
PAP
BOTH
LOCAL
REMOTE
DISABLED







COUNTER
CONFIGURE
FAILURE
TERMINATE





num
HEADERCOMPRESSION
MAGICNUMBER
PROTOCOLCOMPRESSION
ENABLED
DISABLED



MULTILINK
ENABLED
DISABLED



TIMEOUT time




































