User Manual

Command Reference Port Commands
12-68
12.6.29 Set/Define Ports Loss Notification
Sends the terminal device a Ctrl-G (Bell) when a typed character is lost due to a data error or an overrun on
the SCS.
Restrictions Requires privileged user status if you want to use this command on a port other
than your own. Secure users may not use this command.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Defaults Enabled
See Also Notification of Character Loss, page 8-13
12.6.30 Set/Define Ports Menu
Specifies whether or not the port will be placed in menu mode at login. If it is disabled, the Local> prompt
will appear at login. If it is enabled, a menu screen will be displayed; the Local> prompt is not accessible.
Restrictions Requires privileged user status if you want to use this command on ports other
than your own.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Defaults Disabled
SET
DEFINE



PORTS
PortList
ALL
LOSS
NOTIFICATION
ENABLED
DISABLED



SET
DEFINE



PORTS
PortList
ALL
MENU
ENABLED
DISABLED


