User Manual

Command Reference Port Commands
12-58
7 or 8
Character size must be either 7 or 8 bits.
Defaults 8 bits
Examples
Local>> SET PORTS CHARACTER SIZE 7
See Also Set/Define Ports Autobaud, page 12-52; Set/Define Ports Parity, page 12-69;
Chapter 9, Modems
12.6.18 Set/Define Ports Command Completion
Enables or disables the command completion feature. If enabled, the SCS will attempt to complete partially-
typed command words when the user presses the Space or Tab keys.
Restrictions Requires privileged user status if you want to use this command on ports other
than your own.
Errors If the partially-entered command is ambiguous (or if you are typing an optional
string), the SCS sends a beep to the terminal.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Defaults Disabled
Examples
Local>> SET PORTS COMMAND ENABLED
SET
DEFINE



PORTS
PortList
ALL
COMMAND
COMPLETION
ENABLED
DISABLED


