User Manual

Command Reference Port Commands
12-56
See Also Backwards, page 12-3; Set/Define Ports Forward Switch, page 12-65; Set/
Define Ports Local Switch, page 12-67; Switching Between Sessions, page 8-5
12.6.15 Set/Define Ports Break
Determines where processing of the Break key will take place.
Restrictions Requires privileged user status if you want to use this command on ports other
than your own. Secure users may not use this command.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Local
Pressing the Break key will return to character (Local>) mode.
Remote
The Break key is ignored by the SCS and passed through to the remote service.
None
Pressing the Break key does nothing.
Defaults Local (for serial users), Remote (for virtual port connections)
See Also Set/Define Ports Backward Switch, page 12-55: Set/Define Ports Forward
Switch, page 12-65: Set/Define Ports Local Switch, page 12-67: Exiting
Sessions, page 8-5
SET
DEFINE



PORTS
PortList
ALL
BREAK
LOCAL
REMOTE
NONE




