User Manual

Command Reference Port Commands
12-50
Parameters emailsite
Enter the emailsite name. The only valid names are “default” and “portxx,“
where xx is the port number.
To
Sets the recipient(s) of the email.
address
Enter an email address, or a series of email addresses separated by commas.
Enclose the address in quotes to preserve case and spaces. The max number of
characters for this field is 64 characters. Most SMTP mail servers require a
domain name on the To/From names, e.g. [e-mail] instead of just
admin.
From
Sets the text that will be displayed in the From: field of the email message. The
maximum number of characters for this field is 32.
Subject
Sets the subject line that will be displayed in the email message. Enter a
character string with a maximum length of 48 characters. Enclose the string in
quotes to preserve case and spaces.
string
Enter a character string with a maximum length of 32 characters. Enclose the
string in quotes to preserve case and spaces.
Mailhost
Sets the SMTP mailhost. Enter a string with maximum length of 24 characters.
Enclose the string in quotes to preserve case and spaces.
Replyto
Sets the email address that any response to the email notification will be sent
to. Enclose the address in quotes to preserve case and spaces. The max number
of characters for this field is 32.
Examples
DEFINE EMAIL port2 TO “[e-mail], [e-mail]”
See Also Set/Define Ports Serial Log, page 12-76; Define Ports Event Email Serialdata,
page 12-64; Event Port Logging, page 3-2
12.6.9 Set/Define Ports Access
Sets the type of incoming connections allowed through the physical port.
SET
DEFINE



PORTS
PortList
ALL
ACCESS
DYNAMIC
LOCAL
NONE
REMOTE






