User Manual

Command Reference Port Commands
12-47
12.6.3 Logout Port
Logs out a port. Active sessions are disconnected, and all site circuits are closed.
Restrictions Only privileged users can log out a port or site other than their own.
Parameters Port
Logs out the list of ports specified with the PortList parameter.
PortList
Specifies a port or series of ports to be logged out. Multiple ports must be
separated by commas (for lists) or dashes (for ranges).
Note: If the PortList parameter isn’t specified, the current port will be logged out.
Examples Local> LOGOUT
Local>> LOGOUT PORT 2,4-6
See Also Automatic Logouts, page 8-10
12.6.4 Purge Port
Resets a port to the factory default PPP or Modem settings, but without affecting any other port settings.
When used without the PPP or Modem parameters, both PPP and Modem settings are purged.
Restrictions Requires privileged user status.
Parameters PPP
Resets all Link Control Protocol parameters on the specified port.
Modem
Clears the specified port’s modem init information.
PortNum
Specifies a particular SCS port.
See Also Show/Monitor/List Ports, page 12-88; Port Commands, page 12-46
LOGOUT
PORTPortlist
PURGE PORT
PortList
ALL



PPP
MODEM