User Manual

Command Reference Port Commands
12-46
12.6 Port Commands
12.6.1 List Email
When entered without any parameters, displays all emailsite configurations that will take place the next time
that emailsite is used. Using the emailsite parameter will show the configurations for that specific site, while
the All parameter will show a detailed listing of all emailsites.
Restrictions Requires privileged user status.
Parameters emailsite
Enter the name of an emailsite.
See Also Purge Email, page 12-48; Define Email, page 12-49; Define Ports Event Email
Serialdata, page 12-64; Event Port Logging, page 3-2
12.6.2 Lock
Locks a port without disconnecting sessions. When you enter this command, you will be queried for a
password (6 alphanumeric characters maximum) and asked to verify it. The port is then locked until that
password is used to unlock it. If a user forgets the password, the privileged user must either logout the port
using the Logout command (disconnecting all sessions) or use the Unlock Port command.
Note: The password and verification are not displayed as the user types them.
Restrictions Secure users may not lock their ports.
Examples
Local> LOCK
Password> donut
Verification> donut
Unlock password> donut
Local>
See Also Set/Define Server Lock, page 12-122; Unlock Port, page 12-91; Logout Port,
page 12-47; Set/Define Ports Security, page 12-76; Locking a Port, page 8-9
LIST EMAIL
emailsite
ALL
LOCK