User Manual

Command Reference IP/Network Commands

12-40

PortList

A port or series of ports to be restricted. Multiple ports must be specified with

a comma; ranges of ports must be specified with a dash (-).

Printer

Enables or disables LPR and RTEL printing from the specified host(s).

Defaults Both Enabled, Printing Enabled

Examples

Local>> SET IP SECURITY ADDRESS 192.0.1.255 INCOMING ENABLED OUTGOING

DISABLED

Local>> SET IP SECURITY 134.0.1.255 PORT 3,5-7

See Also Clear/Purge IP Security, page 12-17; Show/Monitor/List IP Security, page 12-

43; IP Security, page 6-14

12.5.25 Set/Define IP Subnet

Specifies a subnet mask as an IP address. The mask must be specified using the address parameter.

Restrictions Requires privileged user status.

Parameters Mask

Specifies a subnet mask. Must be used in conjunction with the address

parameter. If a subnet mask isn’t specified, a default subnet mask will be

inferred from the server’s current IP address.

address

An IP address in standard numeric format (for example, 255.255.192.0).

Examples

Local>> SET PROTOCOL IP SUBNET MASK 255.255.255.0