User Manual

Command Reference IP/Network Commands
12-36
12.5.18 Set/Define IP IPaddress
Specifies the server’s IP address for TCP/IP connections. The address must be specified using the address
parameter, described below.
Restrictions Requires privileged user status.
Errors An error is returned if there are active connections to the SCS. An error is
returned if the address is in use by another node.
Parameters address
An IP address in standard numeric format (for example, 193.0.1.50).
See Also Show/Monitor/List IP, page 12-43; IP Addresses, page 6-1
12.5.19 Set/Define IP Loadhost
Specifies the IP address of the host used for TFTP loading.
Restrictions Requires privileged user status.
Parameters address
An IP address in standard numeric format (for example, 193.0.1.5).
See Also Set/Define Server Loadhost, page 12-122
12.5.20 Set/Define IP Nameserver
Specifies the IP address of the local nameserving host for use on IP connections and NetBIOS connections
that use IP. The host’s address must be specified using the address parameter, described below.
Restrictions Requires privileged user status.
SET
DEFINE



PROTOCOLS
IP IPADDRESS address
SET
DEFINE



PROTOCOLS
IP
SECONDARY
LOADHOST address
SET
DEFINE



PROTOCOLS
IP
SECONDARY
NAMESERVER address