User Manual

Command Reference IP/Network Commands
12-32
12.5.13 Set/Define IP All/Ethernet
Configures all interfaces on an Ethernet interface.
Restrictions Requires privileged user status.
Parameters All
Configures all IP interfaces.
Ethernet
Configures an Ethernet interface. To specify the number of the Ethernet, the
Ethernum parameter must be used. If no number is entered, the configuration
will affect the primary interface.
Note: Servers with one Ethernet port do not need the optional Ethernum parameter;
when omitted, it defaults to zero.
Ethernum
Enter the number of a specific secondary Ethernet interface. If a zero is
entered, the configuration will affect the primary interface.
TTL
Sets the amount of time that the IP Time-To-Live value should be decremented
by when routed through this interface. The specific amount must be set using
the TTLnum parameter.
SET
DEFINE



PROTOCOLS
IP
ALL
ETHERNET
Ethernum





TTL TTLnum
DEFAULT
ENABLED
DISABLED



MTU bytes
PROXYY ARP
ENABLED
DISABLED



–
RIP
LISTEN
SEND
ENABLED
DISABLED



METRIC num







TRUSTED
ENABLED
DISABLED




























SET
DEFINE



PROTOCOLS
IP
ALL
ETHERNET
Ethernum





POOL
First Last
NONE


