User Manual

Command Reference IP/Network Commands
12-18
12.5.5 Clear/Purge IP Trusted
Removes all entries from the trusted router table.
Restrictions You must be the privileged user to use this command.
Parameters address
An IP address in standard numeric format (for example, 193.53.2.2).
All
Clears or purges the entire security table.
Examples
Local>> PURGE IP TRUSTED 192.0.1.1
Local>> PURGE IP TRUSTED ALL
See Also Set/Define IP Trusted, page 12-42; Show/Monitor/List IP Trusted, page 12-43;
Routing Tables, page 6-16
12.5.6 Connect
Establishes a connection with a TCP/IP host. If no hostname is specified, a connection to any preferred host
is attempted.
Note: The keyword “Connect” is not needed for Telnet or Rlogin connections, but must
be included in the command for TCP or Local connections.
Outgoing SSH connections can specify a host, optional port, optional username, and optional command to
be executed on the remote machine. After the command is executed, the SSH connection will end.
CLEAR
PURGE



IPTRUSTED
address
ALL



CONNECT
SSH
host :port :envstring
username
command
TELNET
TCP



host :port :envstring
RLOGIN
host
:port :envstring username
LOCAL
target
:envstring
















