User Manual

Command Reference IP/Network Commands
12-16
12.5 IP/Network Commands
12.5.1 Clear/Purge Hosts
Removes a TCP/IP host entry from the SCS table of known hosts. If Clear is used and the host was seen
through the rwho facility, it will reappear as soon as that machine broadcasts again. A host will also
reappear if a user Connects to it.
Restrictions Requires privileged user status.
Errors Clear Telnet Hosts will fail if there are any active Telnet connections on the
server.
Parameters All
Removes the names of all known hosts.
HostName
The name of a Telnet host to be removed.
Examples
Local>> CLEAR HOSTS alex
See Also Set/Define Hosts, page 12-31; Show/Monitor/List Hosts, page 12-43
12.5.2 Clear/Purge IP Factory
Resets IP router options to their factory defaults.
Restrictions Requires privileged user status.
CLEAR
PURGE



TELNET
HOSTS
ALL
username



CLEAR
PURGE



IP FACTORY