User Manual

Command Reference Navigation/Help Commands
12-10
See Also Backwards, page 12-3;Set/Define Ports Forward Switch , page 12-65; Show/
Monitor Sessions, page 12-90; Port-Specific Session Configuration, page 8-4
12.4.8 Help
Accesses the SCS Help system. Using the Help command without any parameters displays all available
commands. Specifying a command gives information about that command a list of its parameters.
Specifying a parameter gives information about the parameter, including any sub-parameters it may have.
Restrictions Requires privileged user status to view help text.
Parameters command
An SCS command name.
parameter
An SCS parameter name. More than one parameter can be added to the Help
command.
Examples
Local> HELP
Local> HELP CONNECT
Local> HELP DEFINE SERVER BROADCAST
See Also Apropos, page 12-3
12.4.9 Monitor
Displays current operating characteristics. The displayed information is updated every 3 seconds until a key
is pressed. Each Monitor command and its parameters are documented together with the corresponding
Show command.
Restrictions You must be the privileged user to use this command.
12.4.10 Netstat
Displays the currently active network connections. This information is primarily meant for debugging
network problems.
Restrictions Secure users may not use this command.
HELP
command parameter
MONITOR
NETSTAT