User Manual

Getting Started Configuration Methods

2-2

2.1.2 Web Browser Interface

The web browser interface allows you to log into and configure your SCS using a standard web browser.

To connect to your SCS using the web browser interface, do one of the following:

◆

From EZWebCon, select your device and choose

Manage

from the Actions menu.

◆

Type your SCS’s IP address or resolvable text name into your web browser’s URL/Location field.

Figure 2-2:

The Web Browser Interface

Once you have connected and entered the login password (see

on page 2-7), you can

configure important settings, view statistics, and update other Server information. Many of the

configurations discussed in this manual can be set using these web pages.

2.1.3 Command Line

To configure the SCS without EZWebCon or the web browser interface, you must enter configuration

commands at the command line. These commands should be entered when a port is in character mode,

which is when the Local> prompt is displayed.

To display the Local> prompt, do one of the following:

◆

Connect a terminal to the serial console port and press the Return key until the prompt is displayed.

Note:

The default serial port parameters are 9600 baud, 8 data bits, 1 stop bit, no

parity, and XON/XOFF flow control.