User Manual

Modem Sharing Examples
10-5
The modems are connected to an SCS as follows:
Three services will be created for the modems: fastmodems, slowmodems, and slowestmodem. These will
be used for the 28,800, 14,400, and 9,600 modems, respectively.
Figure 10-12: Configuring the SCS fastmodems Service
Figure 10-13: Configuring the SCS slowmodems Service
Figure 10-14: Configuring the SCS slowestmodem Service
When all of the configurations have been entered, log the ports out and initialize the server.
10.3.1 Configuring the Redirector
The following table shows how the Redirector setup utility should be configured for this example. All three
SCS services (fastmodems, slowmodems, and slowestmodem) should appear in the Service Selection
window.
Table 10-1: Modems Connected to the SCS
Speed Connected to SCS Modem Type
28,800 bps (2) Ports 2 and 3 6
14,400 bps (4) Ports 4 through 7 5
9,600 bps (1) Port 8 4
Local>> DEFINE SERVICE fastmodems PORTS 2-3 ENABLED
Local>> DEFINE PORT 2-3 ACCESS REMOTE
Local>> DEFINE PORT 2-3 MODEM TYPE 6
Local>> DEFINE PORT 2-3 MODEM CONTROL ENABLED
Local>> DEFINE SERVICE slowmodems PORTS 4-7 ENABLED
Local>> DEFINE PORT 4-7 ACCESS REMOTE
Local>> DEFINE PORT 4-7 MODEM TYPE 5
Local>> DEFINE PORT 4-7 MODEM CONTROL ENABLED
Local>> DEFINE SERVICE slowestmodem PORT 8 ENABLED
Local>> DEFINE PORT 8 ACCESS REMOTE
Local>> DEFINE PORT 8 MODEM TYPE 4
Local>> DEFINE PORT 8 MODEM CONTROL ENABLED
Table 10-2: Redirector Configuration
COM Port # Redirect? Selected Services
COM Port 1 Yes fastmodems
slowmodems
COM Port 2 Yes slowmodems
slowestmodem