User Manual

IP Displaying the IP Configuration
6-20
6.8 Displaying the IP Configuration
The Show IP commands display IP configuration information, including information about the IP router,
IP interfaces, and IP address of the remote host. To display the basic IP configuration, use the Show IP
command without any additional parameters.
Figure 6-45: Show IP Output
The Show IP Interface command displays a one-line summary for each of the router’s interfaces. There
will always be an interface for the Ethernet, as displayed in Figure 6-46. When sites are active, interfaces
to these sites will be displayed.
The Uptime field displays how long (in days:hours:minutes format) each interface has been active. The
Lastin field displays the duration since the last packet arrived on a particular interface. The Lastout field
displays the duration since the interface sent outgoing traffic.
Figure 6-46: Show IP Interface Output
Local>> SHOW IP
SCS Version B1.1/102int(951128)Name:DOC_SERVER
Hardware Addr: 00-80-a3-0b-00-5b Uptime: 3 Days 02:07
IP Address: 192.0.1.53 Subnet Mask: 255.255.255.0
Nameserver: (undefined) Backup Nameserver: (undefined)
Domain Name: (undefined) Host Limit: 200
Timeserver: (undefined) Backup Timeserver: (undefined)
IP Routing: Enabled
Received Sent Seconds since zeroed 270144
IP Frames: 431535 13520 Errors: 0
Fragments: 0 0
TCP Frames: 4616 4046 Connect Failure Reasons:0000
Invalid Frames:1 0 Invalid Packet Reasons: 0030
Retransmissions: 0
ICMP Frames:53 ICMP Reasons:0045
Local>> SHOW IP INTERFACE
SCS Version B1.1/102int(951128) Name:DOC_SERVER
Hardware Addr: 00-80-a3-0b-00-5b Uptime: 3 Days 02:07
Name IP Address Remote IP Address Uptime Lastin Lastout
Ethernet 192.0.1.221 74:07:04 0:00 0:00