User Manual

Command Reference Server Commands
12-117
Parameters ItemNum
A number (1 through 36) and corresponds to the menu entry you are changing.
String
A text string, up to 32 characters long, that is displayed to users in the menu
screen.
Command
A string of text, up to 32 characters long, that is displayed to users in the menu
screen.
TitleString
An optional title for the entire menu, up to 48 characters long. This string
accepts dynamic print variables, as shown in the table below.
Note: Dynamic print variables are case-sensitive. You must use all capital letters in the
variables to avoid problems.
filename
Enter the name of the text file that contains your menu configurations.
Examples
Local>> SET MENU 5 “SHOW SET NODES” SHOW HOSTS”
See Also Show/Monitor/List Menu, page 12-130; Clear/Purge Menu, page 12-115;
Enabling Menu Mode, page 8-12; Configuring Menu Mode, page 3-3; Menu
Configuration Files, page 3-4
Table 12-4: Dynamic Print Variables
Variable Parsing Function
$FN Displays the file name currently being accessed
$SC Prints Lantronix
$SD Adds a date stamp to the web page in the Day Month
Date, Year format (e.g. Tue June 8, 1999)
$SH Substitutes the SCS’s hardware address
$SI Print’s the SCS’s IP address
$SM Prints the domain name of the network the SCS is on, as
specified with the Set/Define IP Domain command
$SN Prints the SCS’s name, as specified with the Set/Define
Server Name command
$SP Prints the product name of the SCS
$ST Adds a time stamp in the Hour:Minutes:Seconds format
(e.g. 12:42:08)
$SV Prints the version of operating software the SCS is
currently using.