User's Manual

13: Maintenance and Diagnostics Settings
PremierWave XC HSPA+ User Guide 82
To Specify Clock Setting Method
Using Web Manager
 To view thread information, click Clock in the menu.
Using the CLI
 To enter the command level: enable -> config -> clock
Using the XML
 Include in your file: <configgroup name="clock">
System Settings
The PremierWave System settings allow for rebooting the device, restoring factory defaults,
uploading new firmware and updating a system’s short and long name.
Note: Anytime you reboot the unit, this operation will take some time to complete.
Please wait a minimum of 10-20 seconds after rebooting the unit before attempting to
make any subsequent connections.
Table 13-12 System Settings
To Reboot or Restore Factory Defaults
Using Web Manager
 To access the area with options to reboot, restore to factory defaults, upload new firmware,
update the system name (long or short names) or to view the current configuration, click
System in the menu.
Using the CLI
 To enter the command level: enable
System Settings Description
Reboot Device
Reboots the device.
Restore Factory Defaults
Restores the device to the original factory settings. All configuration will be
lost. The PremierWave automatically reboots upon setting back to the defaults.
Upload New Firmware
Write the new firmware file to firmware.rom on the PremierWave. The device
automatically reboots upon the installation of new firmware. See the section,
FTP Settings on page 59.
Short Name Enter a short name for the system name. A maximum of 32 characters are
allowed.
Long Name Enter a long name for the system name. A maximum of 64 characters are
allowed.
PRELIMINARY DRAFT
PRELIMINARY DRAFT