User's Manual

13: Maintenance and Diagnostics Settings
PremierWave XC HSPA+ User Guide 79
To Ping a Remote Host
Using Web Manager
 To ping a Remote Host, click Diagnostics in the menu and select Ping.
Using the CLI
 To enter the command level: enable, ping <host> <count> <timeout>
Using XML
 Not applicable.
Traceroute
Here you can trace a packet from the PremierWave to an Internet host, showing how many hops
the packet requires to reach the host and how long each hop takes. If you visit a web site whose
pages appear slowly, you can use traceroute to determine where the longest delays are occurring.
Table 13-9 Traceroute Settings
To Perform a Traceroute
Using Web Manager
 To perform a Traceroute, click Diagnostics in the menu and select Traceroute.
Using the CLI
 To enter the command level: enable, trace route <host> <port>
Using XML
 Not applicable.
Log
Table 13-10 Log Settings
Diagnostics:
Traceroute Settings
Description
Host Enter the IP address or DNS hostname. This address is used to show the path
between it and the PremierWave when issuing the traceroute command.
Protocol Specify the traceroute protocol.
Diagnostics: Log Description
Output Select a diagnostic log output type:
 Disable - Turn off the login feature.
 Filesystem - Directs logging to /log.txt.Line (1or, 2, ) - Directs logging to the
selected serial line.
PRELIMINARY DRAFT
PRELIMINARY DRAFT