User's Manual

13: Maintenance and Diagnostics Settings
PremierWave XC HSPA+ User Guide 75
To Transfer or Modify Filesystem Files
Using Web Manager
 To create a new file or directory, upload an existing file, copy or move a file, click Filesystem
in the menu and select Browse.
Using the CLI
 To enter the Filesystem command level: enable -> filesystem
Using XML
 Not applicable.
Protocol Stack Settings
There are various low level network stack specific items that are available for configuration. This
includes settings related to IP, ICMP, ARP and SMTP, which are described in the sections below.
IP Settings
Table 13-4 IP Network Stack Settings
To Configure IP Network Stack Settings
Using Web Manager
 To configure IP protocol settings, click Protocol Stack in the menu and select IP.
Using the CLI
 To enter the command level: enable -> config -> ip
Using XML
 Include in your file: <configgroup name=”ip”>
Protocol Stack
IP Settings
Description
IP Time to Live This value typically fills the Time To Live in the IP header.
Enter the number of hops to be transmitted before the packet is discarded.
Multicast Time to Live This value fills the Time To Live in any multicast IP header. Normally this value
will be one so the packet will be blocked at the first router. It is the number of
hops allowed before a Multicast packet is discarded.
Enter the value to be greater than one to intentionally propagate multicast
packets to additional routers.
PRELIMINARY DRAFT
PRELIMINARY DRAFT