User's Manual

PremierWave XC HSPA+ User Guide 59
11: Services Settings
DNS Settings
This section describes the active run-time settings for the domain name system (DNS) protocol.
The primary and secondary DNS addresses come from the active interface. The static addresses
from the Network Interface configuration settings may be overridden by DHCP.
Note: The blue text in the XML command strings of this chapter are to be replaced with
a user-specified name.
Table 11-1 DNS Settings
To View or Configure DNS Settings:
Using Web Manager
 To view DNS current status, click DNS in the menu.
 To lookup DNS name or IP address, click DNS in the menu to access the Lookup field.
Note: To configure DNS for cases where it is not supplied by a protocol, click Network
in the menu and select Interface -> Configuration.
Using the CLI
 To enter the DNS command level: enable -> dns
Using XML
 Include in your file: <configgroup name=”interface” instance=”eth0”>
FTP Settings
The FTP protocol can be used to upload and download user files, and upgrade the PremierWave
firmware. A configurable option is provided to enable or disable access via this protocol.
Table 11-2 FTP Settings
Setting / Field Description
Lookup Perform one of the following:
 Enter an IP address, and perform a reverse Lookup to locate the hostname for
that IP address
 Enter a hostname, and perform a forward Lookup to locate the corresponding IP
address
FTP Settings Description
State Select to enable or disable the FTP server:
 Enabled (default)
 Disabled
PRELIMINARY DRAFT
PRELIMINARY DRAFT