User's Manual

6: Network Settings
PremierWave XC HSPA+ User Guide 39
Using the CLI
 To enter the gateway command level: enable -> config -> gateway -> port
forwarding rule <number>
Using XML
 Include in your file: <configgroup name="gateway"> <configitem name="port
forwarding" instance="<number>">
Static Routes
Allows the user to add routes to the device routing table.
Table 6-6 Adding a New Static Route
To Configure Gateway Static Route Settings
Using Web Manager
 To modify gateway static route information, click Gateway on the menu and select
Configuration > Static Routes.
Using the CLI
 To enter the gateway command level: enable -> config -> gateway -> static
route <number>
Using XML
 Include in your file: <configgroup name ="gateway"> <configitem name="static
routes" instance="<number>">
Static Route Settings Description
Enabled Enables the static route
Delete Deletes the static route
Name User friendly name for the route. Click on the [Edit] icon to make changes.
Route Network or Host for the route
Applied If the route was successfully applied. Routing table updates require a
reboot and route needs to be valid as per other device configurables.
Adding New Static Route
Settings
Description
Name User friendly name for the route
Network Network or Host for the route
Gateway Gateway for the route
Interface Interface for the route
Metric Priority for the route. Lower metric means higher priority.
PRELIMINARY DRAFT
PRELIMINARY DRAFT