User's Manual

2: Introduction
PremierWave XC HSPA+ User Guide 15
 ARP, HTTP, HTTPS, SMTP AUTH, SNMP v1/v2c/v3, Modbus TCP, UDP/IP, TCP/IP, SSH,
SSL, TLS, RSS, UPnP, ICMP, BOOTP, DHCP, Auto IP, Telnet, SNTP, FTP, FTPS, DNS,
TFTP, XML and Syslog for network communications and management.
 TFTP for uploading/downloading files.
 FTP and HTTP/HTTPS web server for firmware upgrades and uploading/downloading files.
 TCP/IP, UDP/IP, Telnet, SSH, SSL, TCP AES and UDP AES for command/response based
data acquisition application or alarm triggered connection
 HTTP/HTTPS web based monitoring of input readings, chart and data logging
 SMTP AUTH, HTTP/HTTPS Post, FTP/FTPS Put and SNMP Traps for alarm triggered
notification
 SNTP for device clock synchronization
 SMS for alarm triggered notification.
Troubleshooting Capabilities
The PremierWave XC HSPA+ offers a comprehensive diagnostic toolset that lets you troubleshoot
problems quickly and easily. Available from the CLI or Web Manager, the diagnostic tools let you:
 View memory and IP socket information.
 Perform ping and traceroute operations.
 Conduct forward or reverse DNS lookup operations.
 View all processes currently running on the PremierWave, including CPU utilization.
 View system log messages.
Configuration Methods
After installation, the PremierWave requires configuration. For the unit to operate correctly on a
network, it must have a unique IP address on the network. There are four basic methods for
logging into the PremierWave and assigning IP addresses and other configurable settings:
 Web Manager: View and configure all settings easily through a web browser using the
Lantronix Web Manager. (See “Configuration Using Web Manager” on page 27.)
 DeviceInstaller: Configure the IP address and related settings and view current settings on
the PremierWave using a Graphical User Interface (GUI) on a PC attached to a network. You
will need the latest version of DeviceInstaller. (See “Using DeviceInstaller” on page 25.)
 Command Mode: There are two methods for accessing Command Mode (CLI): making a
Telnet or SSH connection, or connecting a PC or other host running a terminal emulation
program to the unit’s USB port. (See the PremierWave XC HSPA+ Command Reference
Guide for instructions and available commands.)
 XML: The PremierWave supports XML-based configuration and setup records that make
device configuration transparent to users and administrators. XML is easily editable with a
standard text or XML editor. (See the PremierWave XC HSPA+ Command Reference Guide
for instructions and commands.)
PRELIMINARY DRAFT
PRELIMINARY DRAFT