User Guide

Using Web Manager
 To view hardware information, click Diagnostics in the menu bar and select Hardware.
Using the CLI
 To enter the command level: enable -> device, show hardware information
Using XML
 Include in your file: <statusgroup name=”hardware”>
IP Sockets
You can view the list of listening and connected IP sockets.
To View the List of IP Sockets
Using Web Manager
 To view IP Sockets, click Diagnostics in the menu bar and select IP Sockets.
Using the CLI
 To enter the command level: enable, show ip sockets
Using XML
 Include in your file: <statusgroup name=”ip sockets”>
Ping
The ping command can be used to test connectivity to a remote host.
Table 11-10 Ping Settings
Diagnostics: Ping Settings Description
Host Enter the IP address or host name for the PremierWave XC to ping.
Count Enter the number of ping packets PremierWave XC should attempt to
send to the Host. The default is 5.
Timeout Enter the time, in seconds, for the PremierWave XC to wait for a
response from the host before timing out. The default is 5 seconds.
PremierWave XC User Guide 77