User Guide

APN Configuration The APN is a Network Identifier used by the Carrier to determine
the type of Network Service you requested for your mobile device.
You Service Provide will provide the APN information along with
your SIM Card.
Note: Do make sure that the APN, User Name, Password and
Dialup Number is entered correctly, if not, GPRS attachment would
fail. This typically refers to the Data Network Access (GPRS). GSM
(Text SMS) functionality is typically does not require APN to
operate.
To Configure Network 2 APN Configuration Settings
Using Web Manager
 To modify Network 2 APN Configuration settings, click Network and select Network 2 →
Configuration → APN Configuration
Using the CLI
 To enter the Network 2 APN Configuration command level: enable -> config -> if 2
-> link -> apn
Using XML
Include in your file: <configgroup name="ppp">
Network 2 Carrier Connection Settings
Table 6-9 shows the settings for Carrier Connection settings.
Table 6-9 Network 2 (wwan0) Carrier Connection Settings
Network 2 (wwan0)
Carrier Connection
Settings
Description
Carrier Connection The Carrier Connection, is the identity of the Carriers supported by
the SIM Card Provider. If selection is Manual, you will have to run
the Network Scan function to see a list of the Carriers supported
based on the SIM Card. Refer to the your SIM Card Service
Providers as to which Carrier to select.
Selecting Auto, allows the Mobile device to determine which
Carrier best matches the SIM Card configuration. Select Auto,
unless your Service Provider direct you to change it.
PremierWave XC User Guide 43