User Guide

Network 2 SIM Pin Settings
Table 6-7 shows the settings for SIM Pin settings.
Table 6-7 Network 2 (wwan0) SIM Pin Settings
Network 2 (wwan0)
SIM Pin Settings
Description
SIM Pin Input the SIM pin if required
Note: The SIM PIN is a 4 digit numeric code used to unlock the SIM Card.
This allows mobile devices to gain access network specific access
information stored on the SIM. If the SIM PIN functionality is enabled on the
SIM Card, Network Registration will not start until after a valid PIN number
has been configured. This is for both the GSM and and GPRS networks.
Note: Upon 3 failed consecutive PIN attempts, SIM Card will be locked (old
PIN will become invalid). To unlock the SIM Card, you will have contact the
Provider of the SIM Card and request a PIN Unlock (PUK) code. Use this
with caution, because 10 failed PUK attempts will lock the SIM forever!
Typically SIM Cards are delivered from the Provider with SIM PIN function
disabled.
To Configure Network 2 SIM Pin Settings
Using Web Manager
 To modify Network 2 SIM Pin settings, click Network and select Network 2 → Configuration
→ SIM PIN
Using the CLI
 To enter the Network 2 SIM Pin command level: enable -> config -> if 2 -> link
-> pin
Using XML
Include in your file: <configgroup name="pin">
Network 2 APN Configuration Settings
Table 6-8 shows the settings for APN Configuration settings.
Table 6-8 Network 2 (wwan0) APN Configuration Settings
Network 2 (wwan0)
APN Configuration Settings
Description
PremierWave XC User Guide 42