User Guide

Using XML
 Include in your file: <configgroup name="ethernet" instance="eth0">
Network 2 Interface Status
To View Network 2 Interface Status
On the Network 2 Interface Status page, you can view the GSM/GPRS status of the device.
 To view the Network 2 (wwan0) Status page, click Network on the menu bar and select
Network 2 -> Status.
Network 2 SMS Outbound Settings
Table 6-3 shows the settings for SMS Outbound, and Test Send Message.
Table 6-3 Network 2 (wwan0) SMS Outbound Settings
Network 2 (wwan0)
SMS Outbound Settings
Description
SMS Outbound Select the appropriate SMS format.
Note:
Select the Text ASCII when sending SMS in Text format
-7 bit characters and typically limited to 160 characters per message.
Select Binary to send SMS in Binary format.
-8 bit characters and typically limited to 140 characters per message.
Select Unicode to send SMS in Unicode format.
-16 bit characters and typically limited to 70 characters per message.
Message Center No. Input the SMS center Number.
Note: This field is required only if the SMS center is incorrect.
Channel Select the appropriate Channel to send SMS.
Select Voice to send SMS over GSM Channel.
Select Data to send SMS over GPRS Channel.
Note: The default network setting for transmission of SMS messaging is
GSM. However, there are Carriers that supports sending of SMS messages
over their GPRS network. Check with your provider.
Send Test Message button Click to send out Test SMS Message
Note: Test the SMS settings with the Test phone number and Test
message body.
PremierWave XC User Guide 38