User Guide

3: Installation of PremierWave XC
This chapter describes how to install the PremierWave XC device server. It contains the following
sections:
 Package Contents
 User-Supplied Items
 Hardware Components
 Installing the PremierWave XC
Package Contents
The PremierWave XC package includes the following items:
 One PremierWave XC device
 One 3 Pin Terminal Mating Connector
 One 6 Pin Terminal Mating Connector
 One Power Supply 12VDC with International adapters
 One External Antenna, 1.5 meter, SMA Connector
 One RJ-45 Ethernet Straight Cat5 Cable, 1.5 meter
 Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
 RS-232/422/485 serial devices that require network connectivity.
A serial cable, as listed below, for each serial device. One end of the cable must have a
female DB9 connector for the serial port.
- A null modem cable to connect the serial port to another DTE device.
- A straight-through modem cable to connect the serial port to a DCE device.
 An available connection to your Ethernet network and an Ethernet cable.
 A Working SIM Card with your Network Carrier
 A Working DDNS Account with DynDNS.com
 A working power outlet if the unit will be powered from an AC outlet.
 An additional power supply to supply power(9-30VDC) for the Backup Power Supply if
required.
PremierWave XC User Guide 17