User Guide

2: Introduction
The PremierWave™ XC is a unique, hybrid Ethernet and GSM/GPRS terminal/multiport device
server which allows remote access to and management of virtually any IT/networking equipment
or device connected via Ethernet or GPRS through ‘Serial-tunneling’. Applications include
medical equipment, POS terminals or security equipment.
Key Features
 Power Supply: Regulated 9 - 30 Vdc input required. There is a step-down converter to 1.5
volts for the processor core. All voltages have LC filtering to minimize noises and emissions.
 Controller: A Lantronix DSTni-FX 32-bit microprocessor, running at 166 MHz internal bus and
83 MHz external bus.
 Memory: 16 MB Flash and 8 MB SDRAM.
 Ethernet: 10/100 Mbps Ethernet transceiver.
 Power: Redundant Hot Failover Power Supply via Power 1 and Power 2.
 Serial Ports: Two RS232/422/485 high-speed serial ports with all hardware handshaking
signals.Baud rate is software selectable (300 bps to 921600 bps). Both serial interfaces
support RS-485 termination resistors which can be software enabled.
 Two USB 2.0 Full Speed (12 Mbps) Host ports, currently used for USB thumb drive devices
for storage.
 Fail-Over (backup) Data Network Media Support for either Ethernet or Cellular GPRS.
 Events can be configured to generate alerts via SMS, SNMP trap and Relay Output.
 Temperature Range: Operates over an extended temperature range of -40°C to +85°C.
PremierWave XC User Guide 13