User Manual
Table Of Contents
- PremierWave EN User Guide
- 1: Using This Guide
- 2: Introduction
- 3: Using DeviceInstaller
- 4: Network Settings
- 5: Line and Tunnel Settings
- 6: Configurable Pin Manager
- 7: Services Settings
- 8: Security Settings
- 9: Maintenance and Diagnostics Settings
- 10: Advanced Settings
- 11: Tunneling
- 12: Security in Detail
- 13: Updating Firmware
- A: Technical Support
- B: Binary to Hexadecimal Conversions
- C: Compliance
- D: Warranty
- E: USB-CDC-ACM Device Driver File for Windows Hosts
- Index
11: Tunneling
PremierWave EN User Guide 54
TCP
Accept Mode has the following states:
Disabled (never a connection)
Always (always listening for a connection)
Packing Mode
Packing Mode takes data from the serial port, groups it together, and sends it out on the
network. When either a queued Threshold (number of bytes) or a Timeout is reached, the
data is sent. Packing Mode cannot be disabled.
The following settings are configurable for Packing Mode:
Timeout: Specifies the time duration, in milliseconds, to collect data received from the
serial line, before sending it on the network. Timeout begins when at least one byte is
received on the serial line.
Threshold: Specifies the amount of data, in bytes, to collect from the serial line, before
sending it on the network.