User Manual
Table Of Contents
- PremierWave EN User Guide
- 1: Using This Guide
- 2: Introduction
- 3: Using DeviceInstaller
- 4: Network Settings
- 5: Line and Tunnel Settings
- 6: Configurable Pin Manager
- 7: Services Settings
- 8: Security Settings
- 9: Maintenance and Diagnostics Settings
- 10: Advanced Settings
- 11: Tunneling
- 12: Security in Detail
- 13: Updating Firmware
- A: Technical Support
- B: Binary to Hexadecimal Conversions
- C: Compliance
- D: Warranty
- E: USB-CDC-ACM Device Driver File for Windows Hosts
- Index
10: Advanced Settings
PremierWave EN User Guide 50
Telnet Settings
The telnet settings control CLI access to the PremierWave EN over the Telnet protocol.
Table 10-4 Telnet Settings
Telnet Settings
Description
state
Enable or disable CLI access via telnet
authentication
Enable or disable authentication for telnet logins.
Table 10-5 Using the CLI to Configure Telnet Settings
Command level
enable>configure>cli>telnet
Commands
state <enable|disable>
authentication <enable|disable>
show
Table 10-6 Using XML to Configure Telnet Settings
Configuration group name
telnet
Configuration item names
state
authentication
SSH Settings
The ssh settings control CLI access to the PremierWave EN over the SSH protocol.
Table 10-7 SSH Settings
SSH Settings Description
state
Enable or disable CLI access via telnet
Table 10-8 Using the CLI to Configure the SSH Settings
Command level
enable>configure>cli>telnet
state <enable|disable>
show
Commands
state <enable|disable>
show
Table 10-9 Using XML to Configure the SSH Settings
Configuration group name
ssh
Configuration item names
state