User Manual
Table Of Contents
- PremierWave EN User Guide
- 1: Using This Guide
- 2: Introduction
- 3: Using DeviceInstaller
- 4: Network Settings
- 5: Line and Tunnel Settings
- 6: Configurable Pin Manager
- 7: Services Settings
- 8: Security Settings
- 9: Maintenance and Diagnostics Settings
- 10: Advanced Settings
- 11: Tunneling
- 12: Security in Detail
- 13: Updating Firmware
- A: Technical Support
- B: Binary to Hexadecimal Conversions
- C: Compliance
- D: Warranty
- E: USB-CDC-ACM Device Driver File for Windows Hosts
- Index
PremierWave EN User Guide 49
10: Advanced Settings
Command Line Interface Settings
The Command Line Interface settings allow you to control how users connect to and interact
with the PremierWave’s command line. It is possible to configure access via the Telnet and
SSH protocols, in addition to general CLI options.
Basic CLI Settings
The basic CLI settings control general CLI access and usability options.
Table 10-1 CLI Configuration Settings
Command Line Interface Configuration
Settings
Description
Login Password
Enter the password for logins by the admin account.
The default password is “PASS”.
Enable Level Password
Enter the password for access to the Command Mode
Enable level. There is no password by default.
Line Authentication
Enable or disable authentication for CLI access on the
serial lines.
Table 10-2 Using the CLI to Configure the Basic CLI Settings
Command level
enable>configure>cli
Commands
login password <text>
enable level password <text>
line authentication <enable|disable>
show
Table 10-3 Using XML to Configure the Basic CLI Settings
Configuration group name
cli
Configuration item names
login password
enable level password
line authentication